Quick Search:    advanced search

GSW Home   GeoRef Home   My GSW Alerts   Contact GSW   About GSW   Journals List   Help

This Article Abstract Figures Only Full Text (PDF) Alert me when this article is cited Alert me if a correction is posted Citation Map Services Email this article to a friend Similar articles in this journal Similar articles in ISI Web of Science Alert me to new issues of the journal Download to citation manager Citing Articles Citing Articles via HighWire Citing Articles via ISI Web of Science (5) Citing Articles via Google Scholar Google Scholar Articles by GUILLAUME, D. Articles by MICHAU, N. Search for Related Content GeoRef GeoRef Citation

Experimental study of the transformation of smectite at 80 and 300°C in the presence of Fe oxides

¹ Géologie et Gestion des Ressources Minérales et Energétiques (G2R), UMR 7566 CNRS-CREGU-INPL-UHP, Université Henri Poincaré, BP 239, 54506 Vanduvre-lès-Nancy, ² Laboratoire Environnement et Minéralurgie (LEM), UMR 7569 CNRS-INPL, Ecole Nationale Supérieure de Géologie, BP 40, 54501 Vanduvre-lès-Nancy, ³ Laboratoire de Chimie Physique et Microbiologie pour l’Environnement (LCPME), UMR 7564 CNRS-UHP, Université Henri Poincaré, 405 rue de Vanduvre, 54600 Villers-lès-Nancy, ⁴ Agence nationale pour la gestion des déchets radioactifs (ANDRA), Direction Scientifique/Service Matériaux, Parc de la Croix Blanche, 1/7 rue Jean Monnet, 92298 Châtenay-Malabry, France

^* E-mail: damien.guillaume{at}g2r.uhp-nancy.fr

(Received 6 January 2003; revised 26 July 2003)

	ABSTRACT

TOP ABSTRACT MATERIALS AND METHODS RESULTS DISCUSSION CONCLUSIONS ACKNOWLEDGMENTS REFERENCES

 
The alteration and transformation behaviour of montmorillonite (Wyoming bentonite) was studied experimentally to simulate the mineralogical and chemical reaction of clays in contact with steel in a nuclear waste repository. Batch experiments were conducted at 80 and 300°C, in low-salinity solutions (NaCl, CaCl₂) and in the presence or otherwise of magnetite and hematite, over a period of 9 months. The mineralogical and chemical evolution of the clays was studied by XRD, SEM, transmission Mössbauer spectroscopy and EDS-TEM. Experimental solutions were characterized by ICP-AES and ICP-MS. The main results are that no significant change in the crystal chemistry of the montmorillonite occurred at 80°C, while at 300°C, the presence of Fe oxides leads to a partial replacement of montmorillonite by high-charge trioctahedral Fe²⁺-rich smectite (saponite-like) together with the formation of feldspars, quartz and zeolites.

KEYWORDS: bentonite, smectite, saponite, magnetite, hematite, experimental synthesis, EDS-TEM, transmission Mössbauer spectroscopy, X-ray diffraction

Numerous data are available from the literature on the experimental behaviour of smectites under hydrothermal conditions, generally in the presence of chloride solutions (e.g. Eberl, 1978; Eberl et al., 1978; Yamada et al., 1998). Iron is present in a variety of environments under several types of mineral phases: oxides (mostly hematite) or sulphides in clay-rich mudrocks, steel and its related oxidation products (goethite, lepidocrocite) in underground works (artificial barriers, tunnels, etc.). The availability of Fe in a solution-clay system depends mostly on the oxidation-reduction conditions and needs to be considered to predict the evolution of both natural systems and those disturbed by human activities: in this case, clay barriers in nuclear waste disposal. Although hematite-magnetite is probably not acting as an oxygen buffer at low temperatures, the presence of Fe oxides together with chloride solutions under intermediate redox conditions (from a theoretical f_O2 value typical of hematite-magnetite equilibrium to values expected in systems purged of significant oxygen reserve) is important to consider for the prediction of the mineralogical evolution of the Fe-smectite-chloride solution system. Some qualitative description of the evolution of Fe-rich clays in natural systems such as the alteration of the oceanic crust is relatively well known (e.g. Buatier et al., 1989, 1993, 1995). However, only few experimental data are available on a smectite/Fe oxides (hematite + magnetite) system.

The review by Madsen (1998) carried out under conditions close to those of nuclear waste disposal mentions an experimental study of the bentonite-magnetite systems at 80°C up to 29 weeks under low pressure (P < P sat. H₂O vapour, Müller-Vonmoos et al., 1991). No change in the mineralogy, interlayer charge and cation exchange capacity (CEC) of the samples was detected. Minor changes are probably partly due to the fact that no free water was added to the system, the water being mostly under vapour phase, thus inhibiting significantly the dissolution of minerals and mineral-water reactions.

In the present study, experiments have investigated the hydrothermal stability of a bentonite at 80 and 300°C in the presence of magnetite, hematite and chloride solutions under saturated vapour conditions. Analytical investigations concern both solid and liquid phases.

	MATERIALS AND METHODS

TOP ABSTRACT MATERIALS AND METHODS RESULTS DISCUSSION CONCLUSIONS ACKNOWLEDGMENTS REFERENCES

 
Starting material
The MX80 bentonite (Na/Ca-bentonite, Wyoming), referred to as ‘starting bentonite’, was used for the experiments. It has a CEC of 79 mEq/100 g (Table 1) and the following composition (Guillaume et al., 2001a): montmorillonite (79%), quartz (3%), K-feldspars (2%), plagioclases (9%), carbonates (2%), mica (3%) and other minerals (mostly pyrite, phosphates and hematite, 2%). The crystal chemistry of the montmorillonite (<2 µm fraction of the bentonite) is based on microprobe analyses that are in good agreement with EDS and ICP-MS analyses. Taking into account an Fe³⁺/Fe_tot ratio determined by transmission Mössbauer spectroscopy and EELS-TEM (Guillaume et al., 2001b), the structural formula is:

(1)

Preparation of the starting solid-solution system
The solution was prepared from analytical-grade chemicals. A Milli-Q Reagent Water System from Millipore Corp. provided deionized water (DI) with a resistivity >18 M cm^–1. Na⁺ and Ca²⁺ chlorides were added to deionized water to simulate the Na⁺/Ca²⁺ ratio of natural water in sediments which in general is between 10 and 100. The starting solution contained 0.0207 mol/kg NaCl and 0.0038 mol/kg CaCl₂ and the total chloride concentration was 0.0282 mol/kg. Bentonite (1.5 g) was added to the solution with a liquid/solid mass ratio of 10. Then, in the case of experiments carried out in the presence of added Fe oxides, magnetite and hematite powders were added with an Fe/bentonite mass ratio of 0.1 and a magnetite/hematite mass ratio of 1. Argon was bubbled throughout the solution-clay suspension over a period of 45 min to obtain an oxygen-free system and the preparation was equilibrated at room temperature for 6 days. The solution pH was then measured using a Mettler® combination pH electrode at 25°C, and the Na⁺/Ca²⁺ ratio of the reacting solution was around 75 (±2) as a result of exchange processes. Two types of solid assemblages were used at 80 and 300°C: (1) bentonite with no Fe oxide added (samples named ‘Bentonite 80’ and ‘Bentonite 300’); (2) bentonite with added magnetite and hematite powders (samples named ‘Mt-Hm 80’ and ‘Mt-Hm 300’).

Experimental procedure
The experimental conditions are listed in Table 1. The starting solids and solution mixture were mounted, under argon atmosphere, inside autoclaves. Teflon-lined autoclaves (capacity ~24 ml) were used for the 80°C experiments and gold-lined warm-seal autoclaves (capacity ~18 ml) for the 300°C experiments. The gold liner is mechanically sealed by a gold disc when the autoclave is closed by bolting. The autoclaves are then heated up to 80 and 300°C in two furnaces. The internal pressure is the liquid-vapour equilibrium pressure at 80 or 300°C. The durations of the experiments were 1 week, 1, 3 and 9 months. The temperature control was stable to ~2°C. The vessels were removed at specific time intervals, quenched at 25°C and opened under argon atmosphere. Run-samples were collected under argon atmosphere and centrifuged to extract the solution. Solution aliquots were taken, measured for pH and Eh and filtered through 0.45, then 0.02 µm, filters into cleaned polypropylene bottles and analysed. The solid was dried under argon flux at room temperature and gently ground in a mortar. Run samples were then stored in hermetically closed boxes under argon atmosphere until they were analysed. Solids were suspended again in pure water for the preparation of oriented mounds for XRD, or in methanol for the preparation of TEM grids.

X-ray diffraction (XRD)
The XRD data were collected using a D8 Bruker diffractometer with Co-K₁ radiation ( = 1.7902 Å). The XRD patterns of unoriented powders were obtained in order to identify non-clay minerals. The XRD analysis was also carried out for the air-dried and ethylene glycol (EG)-saturated oriented specimens of the <2 µm fractions of the starting- and run-samples. The Greene-Kelly (Hoffmann-Klemen) test was performed (Greene-Kelly, 1953; Hoffmann & Klemen, 1950). The <2 µm fraction of each run sample was Li saturated, heated at 400°C overnight and then glycerol saturated. Pure silica slides were used for oriented specimens of Li-saturated samples to avoid Na migration from the glass (Byström-Brusewitz, 1975). Additional treatments included (1) K saturation, heating at 110°C overnight followed by EG saturation, (2) Mg saturation and glycerol-saturation, and (3) Li saturation then EG saturation.

Cation exchange capacity (CEC)
The CECs of the starting and run samples were determined as follows. Samples were Ba²⁺ saturated by treating three times with 1 N BaCl₂ solution, washed with distilled water and centrifuged until the electrical conductivity of the equilibrium solution was <10 µ cm^–1. Ba²⁺ was then exchanged by treating the samples three times with 1 N NaNO₃ solution. Ba²⁺ concentrations in the solutions were determined by atomic absorption spectrometry.

Scanning electron microscopy (SEM)
Scanning electron micrographs were obtained using an Hitachi S-2500 Fevex scanning electron microscope. The denser fraction of each sample was separated by successive ultrasonication and sedimentation in alcohol, then disposed on carbon adhesive sticks. Semi-quantitative chemical analyses were also performed. The separated <2 µm fraction of each run sample was also examined to check the nature of newly formed non-clay minerals intimately associated with the clay.

Transmitted Mössbauer spectroscopy (TMS)
Transmission Mössbauer spectra were collected using a constant-acceleration spectrometer with a 50 mCi source of ⁵⁷Co in Rh. The spectrometer was calibrated with a 25 µm foil of -Fe at room temperature. Spectra were obtained at 12 K or 150 K. The cryostat consisted of a closed-cycle helium Mössbauer cryogenic workstation with vibrations isolation stand manufactured by Cryo Industries of America. Helium exchange gas was used to thermally couple the sample to the refrigerator, allowing variable temperature operation from 12 to 300 K. The samples were set in the sample holder in a glove box filled with an Argon atmosphere and quickly transferred in the cryostat for Mössbauer measurements. Computer fittings are performed by using Lorentzian-shape lines. The parameters that results from any computer fitting must be both mathematically (² minimization) and physically significant; in particular the width of all lines must be small enough (Benali et al., 2001).

Energy dispersive spectroscopy (EDS-TEM)
Micro-chemical analyses of isolated clay particles of the <2 µm fraction were obtained with an EDAX energy dispersive X-ray analyser attached to a CM20-Philips^® instrument operating at 200 kV equipped with Si-Li detector and Li super ultra-thin windows (SUTW). Spectra were collected under nanoprobe mode, over a period of 40 s from an area ~10 nm in diameter. Elemental composition was calculated assuming the thin-film criteria (SMTF program: semi-quantitative metallurgical thin film program) and using k-factors calibrated with independently analysed macroscopic micas, with a maximum error of 5% for each element. 30 to 50 analyses were performed on isolated particles for each sample. The structural formula was calculated for each analysed particle taking into account the Fe³⁺/Fe_tot ratio determined using TMS.

Analyses of run solutions
Chemical analyses of the experimental solutions were obtained by ICP-AES (Na⁺, K⁺, Ca²⁺, Mg²⁺, Fe²⁺ and Si⁴⁺ concentrations) and ICP-MS (Al³⁺ concentration). Solutions were acidified to avoid precipitation of Al or Fe hydroxides and diluted to bring concentrated analytes into quantification ranges of the ICP-AES and ICP-MS techniques. Because hydrochloric acid and sulphuric acid form poly-atomic species, nitric acid was chosen as the acidifying solution for both ICP-AES and ICP-MS analyses at 1.5%w/v and 3%w/v, respectively. The accuracy in measured solution concentrations was ±10%.

	RESULTS

TOP ABSTRACT MATERIALS AND METHODS RESULTS DISCUSSION CONCLUSIONS ACKNOWLEDGMENTS REFERENCES

 
Mineralogy of the added Fe-bearing phases
The magnetite and hematite powders added to the starting samples were detected by both XRD and SEM in all the run samples. No significant difference in the relative intensity of magnetite and hematite reflection lines was detected between the starting and run samples (Fig. 1), indicating that the amount of magnetite and hematite in the sample did not change significantly. However, the size of magnetite and hematite crystals observed with SEM is modified. The starting powders were made of <5 µm grains (Fig. 2a). After the 9 month experiments, 40–200 µm euhedral magnetite and hematite crystals were observed in the run samples (Fig. 2b). In the case of ‘Bentonite’ experiments, the trace amounts of Fe oxides present in the starting sample were not observed in the run samples.

View larger version (31K): [in this window] [in a new window]   FIG. 1. XRD powder patterns of the Mt-Hm starting sample, 1 month, 3 months and 9 months ‘Mt-Hm 300’ run samples, and 9 months ‘Bentonite 300’ run sample. Reflection values in Å.

View larger version (135K): [in this window] [in a new window]   FIG. 2. Evolution of the morphology of primary minerals as seen by SEM: (a) hematite powder used in the Mt-Hm starting sample; (b) hematite and magnetite crystals observed in the 9 months ‘Mt-Hm 80’ run sample; (c) overgrowth of quartz in the 3 months ‘Mt-Hm 80’ run sample; (d) overgrowth of albite in the 9 months ‘Bentonite 300’ run sample; (e) framboidal pyrite in the starting bentonite, (f) partly dissolved pyrite in the 9 months ‘Bentonite 300’ run sample.

Mineralogy of the clay phase
XRD results – transformation of the montmorillonite in the presence of magnetite and hematite at 300°C (‘Mt-Hm 300’ run samples).
The results of the XRD analyses for 00l spacing of the starting and run samples are summarized in Table 3. Oriented slides were prepared for the Mt-Hm starting sample and the 1, 3 and 9 months run samples. The XRD patterns obtained before and after EG saturation are presented in Fig. 3. They show, for air-dried specimens and increasing duration of experiment, a slight decrease of the 12 Å peak (characteristic of the presence of a monovalent cation) and a new reflection at 14.9 Å (characteristic of the presence of a divalent cation) the intensity of which increases, especially after 3 months. This indicates that the starting sodic smectite became progressively sodi-calcic, and then mostly calcic after 9 months. All the run samples expand to ~17 Å after EG saturation, indicating that expandable layers of smectite type remain predominant.

View larger version (17K): [in this window] [in a new window]   FIG. 3. XRD patterns of the Mt-Hm starting-sample, 1 month, 3 months and 9 months ‘Mt-Hm 300’ run samples, and 9 months ‘Bentonite 300’ run sample. (a, c, e, g, i) oriented air-dried; (b, d, f, h, j) EG-saturated. Reflection values in Å.

View larger version (16K): [in this window] [in a new window]   FIG. 4. XRD patterns of the Mt-Hm starting sample, 3 months and 9 months ‘Mt-Hm 300’ run samples, and 9 months ‘Bentonite 300’ run sample, after Greene-Kelly test. Reflection values in Å.

A 9 months run sample which was Mg saturated and then glycerol saturated expands, however, to 17 Å. This indicates that the clay phase is not of vermiculite type.

Some XRD patterns were obtained from powder specimens in the range 70–75°2 (Fig. 1). We observe a decrease in the intensity of the reflection line of dioctahedral smectite (1.49 Å), and a shoulder is observed on the left hand side of the reflection line of quartz (1.54 Å) in the 9 months run sample, indicating the presence of a trioctahedral smectite.

XRD – transformation of the montmorillonite in other experiments.
The 9 months ‘Bentonite 300’ run-sample shows the same type of transformation as the 9 months ‘Mt-Hm 300’ run sample. The XRD patterns from the Greene-Kelly test show a 16.7 Å peak and a small peak at 8.8 Å attributed to a smectite with tetrahedral charge deficiency and a residual amount of the starting montmorillonite, respectively. The XRD powder pattern of the same sample in the range 70–75°2 (Fig. 1) confirms the presence of dioctahedral smectite (1.49 Å) and small amounts of trioctahedral smectite, as indicated by the shoulder on the left hand side of the quartz reflection line (1.54 Å).

The ‘Bentonite 80’ and ‘Mt-Hm 80’ run-samples obtained from experiments at 80°C show no significant evolution of the clay phase (Table 3).

CEC
The results of the CEC measurements for starting and run samples are summarized in the Table 1. No significant evolution of the CEC is detected during the thermal treatment, regardless of the experimental conditions.

Crystal-chemistry of the clay phase
Determination of the Fe³⁺/Fe_tot ratio by TMS.
⁵⁷Fe Mössbauer spectroscopy is the most efficient method by which to characterize the Fe species in solid phases. Mössbauer work on the ‘environmental’ materials has been mainly concerned with Fe in two mineral groups: clay-sized phyllosilicates (often looked upon as clay minerals sensu stricto) and oxides. Ideally, a distinction of Fe in these two groups by Mössbauer spectroscopy is relatively straightforward: the phyllosilicates are paramagnetic at room temperature and may contain both divalent and trivalent Fe, whereas the most common Fe oxides should be magnetically ordered and contain only trivalent Fe, except for magnetite which is the only pure oxide of mixed valence (Murad, 1998).

The Fe³⁺/Fe_tot ratio in the clay phase was calculated from Mössbauer spectra for the 3 and 9 months ‘Mt-Hm 80’ and ‘Mt-Hm 300’ run samples. The results are reported as a function of time in Fig. 5. In the starting clay phase, the Fe³⁺/Fe_tot ratio was 0.55 (Guillaume et al., 2001b). Two distinct trends are observed as a function of temperature: (1) at 300°C, the Fe³⁺/Fe_tot ratio decreases to 0.4 after 3 months, and to 0.3 after 9 months; (2) at 80°C, in the 9 months run sample, the Fe³⁺/Fe_tot ratio increases to a value of 0.9. It was not possible to determine precisely the Fe³⁺/Fe_tot ratio in the 3 months ‘Mt-Hm 80’ run sample. In this sample, the amount of Fe as Fe oxides remains too high compared with the amount of Fe in the clay phase and the fitting of the spectrum was not possible.

View larger version (4K): [in this window] [in a new window]   FIG. 5. Evolution of the Fe3+/Fetot ratio in the clay phase of the run samples measured by TMS vs. experimental duration. Dark diamonds: ‘Mt-Hm 300’ experiments; dark triangle: ‘Mt-Hm 80’ experiment; open circle: comparison with the Fe3+/Fetot ratio in the starting montmorillonite (Guillaume et al., 2001b).

View larger version (30K): [in this window] [in a new window]   FIG. 6. Chemistry of the clay phase of the starting sample (open square), 1 month (filled triangles), 3 months (open diamonds) and 9 months (filled squares) run samples. Si vs. interlayer cations (I.C. = Na+2Ca+K), from structural formulae calculated on the basis of 11 oxygens. Reference minerals are reported: low-charge and high-charge smectite (LC-Sm, HC-Sm), low-charge and high-charge beidellite (LC-Bei, HC-Bei), Muscovite (Mu).

View larger version (20K): [in this window] [in a new window]   FIG. 7. Chemistry of the clay phase of the starting sample (open square), 1 month (filled triangles), 3 months (open diamonds) and 9 months (filled squares) run samples. Fe total vs. Mg, from structural formulae calculated on the basis of 11 oxygens.

The overall evolution of the run products is well discriminated in the diagram (Fe³⁺,Al^VI) vs. (Mg,Fe²⁺) (Fig. 8). Neither ‘Bentonite 80’ nor ‘Mt-Hm 80’ run samples showed any significant evolution. For 300°C experiments, a trend is observed from the dioctahedral smectite domain which characterizes the starting montmorillonite, towards the trioctahedral smectite domain. This evolution is more significant for ‘Mt-Hm 300’ than for ‘Bentonite 300’ run samples.

View larger version (31K): [in this window] [in a new window]   FIG. 8. Chemistry of the clay phase of the starting sample (open square), 1 month (filled triangles), 3 months (open diamonds) and 9 months (filled squares) run samples. (Fe3+,AlVI) vs. (Fe2+,Mg), from structural formulae calculated on the basis of 11 Oxygens.

Solution chemistry
Data on available experimental solutions are summarized in Table 5. The pH and Eh measured after cooling (at room temperature) and filtration of the experimental solution are presented as a function of the experiment duration in Fig. 9. The presence of Fe oxides in the experiments has no significant influence on the measured pH and Eh. At 80°C, the run-solution pH decreases from 8.4 (starting solution pH) to 7.6 for the 3 months experiments, and then remains the same for the 9 months experiments. Eh decreases from +117 mV (starting solution Eh) to +31 mV for the 1 month experiment, and to ~+80 mV for the 3 months and 9 months experiments. At 300°C, the run-solution pH decreases to a value of 6.3 and then remains almost constant after 1 month. Eh decreases significantly from +117 mV to ~–250 mV in 3 months and then increases almost to 0 mV for the 9 months experiments.

View larger version (11K): [in this window] [in a new window]   FIG. 9. Chemistry of the run solutions: (a–b) evolution of pH vs. time for ‘Bentonite’- and ‘Mt-Hm’-type experiments, respectively. (c–d) Evolution of Eh vs. time for ‘Bentonite’- and ‘Mt-Hm’-type experiments, respectively.

View larger version (40K): [in this window] [in a new window]   FIG. 10. Chemistry of the run solutions. Evolution with time of the solution composition (ppm scale) for different cations (Si, Al, Fe, Mg, K, Ca, Na and Cl) and the four different experimental conditions. 1d = 1 day, 1w = 1 week, 1m = 1 month, 3m = 3 months, 9m = 9 months.

The concentrations of Al, Fe and Mg in the experimental solutions, display similar evolutions with time: an increase during the first week followed by a decrease for longer duration in both ‘Bentonite’ and ‘Mt-Hm’ run samples, and higher for 80°C than 300°C experiments. The presence of Mg, Al and Fe in the solution during the first week suggests a partial dissolution of smectite. For the longest durations, the very weak concentrations of Mg, Al and Fe indicate significant uptake by the newly formed clays, zeolites and feldspars.

	DISCUSSION

TOP ABSTRACT MATERIALS AND METHODS RESULTS DISCUSSION CONCLUSIONS ACKNOWLEDGMENTS REFERENCES

 
Evolution of added Fe-bearing phases
Iron oxides (hematite, magnetite) added to the experimental system are stable under the experimental conditions as shown by XRD and SEM data. The starting hematite and magnetite powders dissolve, however, in favour of large crystals following the Ostwald ripening principle (Kang et al., 2002).

Newly formed non-clay minerals: quartz, feldspar and zeolite
The SEM and XRD data demonstrated the formation of new quartz, feldspar and zeolite. Other non-clay minerals that were present in the starting bentonite are consumed. These series of dissolution-precipitation processes occurred rapidly, and were enhanced by the presence of added Fe oxides, especially at 300°C.

Conversion of the starting montmorillonite into newly formed clays, poorer in silica, results in a release of Si to the solution. The excess silica crystallizes as subhedral quartz crystals. Semi-quantitative estimation of the volume of quartz produced by the reaction is in a good agreement with the calculated volume of quartz, which can be formed after release of silica during the dissolution-crystallization process: equations written at constant Al and using the structural formulae of the starting and run products indicate that one mole Na/Ca-smectite may transform approximately into 1.1 moles of saponite and 0.35 moles of quartz (if the formation of feldspar and zeolite is not taken into account for the Si excess).

Newly formed clay phases
On the basis of XRD, CEC, TMS and EDS data, hydrothermal treatment of the bentonite at 300°C resulted in the partial conversion of montmorillonite to saponite. Partly transformed particles are detected by their intermediate compositions as shown by EDS. This transformation is accompanied by a decrease in the Fe³⁺/Fe_tot ratio in the clay phase, the newly formed saponite being Fe²⁺-rich. The presence of hematite and magnetite powders in the experimental system enhances reactions although it has been demonstrated that these minerals are stable in the conditions of the experiments. At 80°C, the montmorillonite is stable at the time scale of our experiments and shows very slight evolution, except for the increase of the Fe³⁺/Fe_tot ratio to 0.9.

Evolution of the solution chemistry
The increase of Si, Fe, Mg and Al content in the run solution during the first weeks of experiments in relation to the dissolution of starting minerals is followed by a strong decrease in element concentrations, in agreement with the precipitation of saponite, quartz, feldspars and zeolite. The evolution of the Eh-pH of the solution is in good agreement with the evolution of the Fe³⁺/Fe_tot ratio in the clay phase as measured by TMS in experiments with added Fe oxides. At 80°C, the system became oxidizing and the Fe³⁺/Fe_tot ratio in the clay phase increased to 0.9. At 300°C, the conditions were more reducing and the Fe³⁺/Fe_tot ratio in the clay phase decreased to 0.3.

Comparison with natural systems and previous works
The formation of quartz, feldspars and zeolites as reaction products of the smectite-Fe oxides-chloride solution system is consistent both with thermodynamic modelling predictions (Cathelineau et al., 2001) and with other experimental data. Feldspars were commonly observed among reaction products in hydrothermal experiments on Na- and K-montmorillonite between 260 and 400°C (Eberl & However, 1977; Eberl, 1978). Inoue (1983) reported the formation of Ca-zeolites (wairakite and heulandite) as well as illite and smectite, from the reaction of Ca-montmorillonite with 0.2 mol l^–1 KOH at 300°C. In addition, zeolites and feldspars associated with smectite are commonly observed in alteration products of volcanic glasses and basic magmatic rocks submitted to hydrothermal alteration (among others, Honnorez, 1981; Kastner, 1981; Cathelineau et al., 1985; Alt et al., 1986; Cathelineau & Izquierdo, 1988; Schiffman & Fridleifsson, 1991).

The evolution of the clay and other minerals in this study completes the results of Guillaume et al. (2003) which provide data on the system metallic Fe-magnetite-smectite at 300°C. In these experiments conducted under similar conditions, the addition of metallic Fe (powder and plaque) + magnetite powder instead of magnetite + hematite powders leads to the formation of chlorite. This chlorite is Fe²⁺-rich at the nearest contact of metallic Fe plaque but it has a higher Mg content in the absence of or far from the metallic Fe plaque. The formation of chlorite is also accompanied by the crystallization of quartz, feldspar and zeolite and dissolution of other trace minerals.

The overall consideration of these two sets of data indicates that the redox state of the system and the availability of Fe are two critical parameters which control the formation of the Fe-rich mineral phases such as chlorite or Fe-saponite, and their relative abundance.

	CONCLUSIONS

TOP ABSTRACT MATERIALS AND METHODS RESULTS DISCUSSION CONCLUSIONS ACKNOWLEDGMENTS REFERENCES

 
Experiments at 300°C resulted in mineralogical changes, such as the formation of Fe saponite, quartz, feldspar and zeolite, and a decrease in the Fe³⁺/Fe_tot ratio in the clay phase.

At 80°C, in the presence or not of added Fe oxides, the starting montmorillonite appears to be stable and no significant transformation is detected except an increase of the Fe³⁺/Fe_tot ratio. Analyses of the solutions show that the system became more oxidizing and TMS data illustrated that the Fe³⁺/Fe_tot ratio in the clay phase increased from 0.55 to 0.9, the smectite containing mostly Fe³⁺. This observation indicates that the kinetics of Fe phase-solution equilibrium was slow at 80°C and during the experiments the system showed oxidizing behaviour.

At 300°C, the redox conditions are far more reducing and yield lower Fe³⁺/Fe_tot ratios in the clay phase, down to 0.3, the newly formed Fe-rich trioctahedral smectite containing mostly Fe²⁺. Thus, the addition of Fe oxides in the system triggers reactions, including the formation of Fe-rich phases, which are more stable than the primary smectite. Results obtained at 300°C also indicate that in some cases clay minerals can be considered as good markers of the evolution of the redox conditions.

The prediction of the potential behaviour of smectite in the presence of steel container and their related alteration products, under nuclear waste repository conditions, is made difficult by the consideration of the potential temperature range of the processes (25–90°C, eventually 150°C), e.g. a temperature below which very little mineralogical change can be determined. Experiments carried out at higher temperatures could eventually be extrapolated to lower temperatures using temperature-time consideration (Arrhenius kinetic laws), if the type of mineralogical change is thought to occur at much lower temperatures. The data obtained cannot answer fully the question of long-term behaviour at low temperatures: (1) the presence of Fe oxides at 80°C does not affect the stability of the smectite for the experimental duration of 9 months, (2) at 300°C, the montmorillonite of the starting bentonite is partly transformed to saponite. The realization of this mineralogical change at temperatures <300°C still needs to be confirmed.

	ACKNOWLEDGMENTS

TOP ABSTRACT MATERIALS AND METHODS RESULTS DISCUSSION CONCLUSIONS ACKNOWLEDGMENTS REFERENCES

 
Experiments were conducted at the Géologie et Gestion des Ressources Minérales et Energétiques laboratory (G2R, CNRS-CREGU-INPL-UHP, Vanduvre-lès-Nancy, France). The XRD data were collected at the Laboratoire Environnement et Minéralurgie (LEM, CNRS-INPL, Vanduvre-lès-Nancy, France), the SEM micrographs at the Université Henri Poincaré (Vanduvre-lès-Nancy, France), the TMS performed at the Laboratoire de Chimie Physique et Microbiologie pour l’Environnement (LCPME, CNRS-UHP, Villers-lès-Nancy, France), the EDS-TEM at the Université Henri Poincaré (Vanduvre-lès-Nancy, France), and the ICP-AES and ICP-MS analyses of solutions at the Centre de Recherches Pétrographiques et Géochimiques (CRPG, CNRS, Vanduvre-lès-Nancy, France). The authors wish to thank J. Ghanbaja (UHP, Vanduvre-lès-Nancy, France) for the EDS analyses and I. Bihannic and F. Lhote (LEM, Vanduvre-lès-Nancy, France) for their help and technical assistance with XRD. This research was supported financially by Andra – Agence Nationale pour la gestion des Déchets RadioActifs (French National Agency for the Management of Radioactive Wastes) – in the framework of its project on the geochemical behaviour of the bentonite engineered barrier. We thank A.G. Türmenoglu, J. Cuevas and A.M. Karpoff, the Associate Editor, for their constructive comments.

	REFERENCES

TOP ABSTRACT MATERIALS AND METHODS RESULTS DISCUSSION CONCLUSIONS ACKNOWLEDGMENTS REFERENCES

 

Alt J., Honnorez J., Laverne C. & Emmerman R. (1986) Hydrothermal alteration of a 1 m section through the upper oceanic crust. Deep Sea Drilling project Hole 504B: mineralogy, chemistry and evolution of sea-water-basalt interactions. Journal of Geophysical Research, 91, 10, 309–335.[GeoRef]

Benali O., Abdelmoula M., Refait P. & Génin J.M. (2001) Effect of orthophosphate on the oxidation products of Fe(II)-Fe(III) hydroxycarbonate: the transformation of green rust to ferrihydrite. Geochimica et Cosmochimica Acta, 65, 1715–1726.[CrossRef][ISI][GeoRef]

Buatier M., Honnorez J. & Ehret G. (1989) Fe-smectite-glauconite transition in the hydrothermal green clays from the Galapagos spreading center. Clays and Clay Minerals, 37, 532–541.[Abstract][CrossRef][ISI][GeoRef]

Buatier M.D., Ouyang K. & Sanchez J.P. (1993) Iron in hydrothermal clays from the Galapagos spreading centre mounds: consequences for the clay transition mechanism. Clay Minerals, 28, 641–655.[Abstract][CrossRef][ISI][GeoRef]

Buatier M.D., Früh-Green G.L. & Karpoff A.M. (1995) Mechanisms of Mg-phyllosilicate formation in a hydrothermal system at a sedimented ridge (Middle Valley, Juan de Fuca). Contributions to Mineralogy and Petrology, 122, 134–151.[CrossRef][ISI][GeoRef]

Byström-Brusewitz A.M. (1975) Studies of the Li test to distinguish beidellite and montmorillonite. Proceedings of the International Clay Conference 1972, Mexico City, Applied Publishing Ltd., Wilmette, Illinois, USA, Pp. 419–428.

Cathelineau M. & Izquierdo G. (1988) Temperature-composition relationships of authigenic micaceous minerals in the Los Azufres geothermal system. Contributions to Mineralogy and Petrology, 100, 418–428.[CrossRef][ISI][GeoRef]

Cathelineau M., Oliver R., Nieva D. & Garfias A. (1985) Mineralogy and distribution of hydrothermal mineral zones in Los Azufres (Mexico) geothermal field. Geothermics, 14, 49–57.[CrossRef][ISI][GeoRef]

Cathelineau M., Mosser-Ruck R. & Charpentier D. (2001) Interactions fluides/argilites en conditions de stockage profond des déchets nucléaires. Intérêt du couplage expérimentation/modélisation dans la compréhension des mécanismes de transformation des argiles et la prédiction à long terme du comportement de la barrière argileuse. Pp. 305–341 in: Actes des Journées Scientifiques ANDRA, Nancy, France. EDP Sciences.

Eberl D.D. (1978) Reaction series for dioctahedral smectites. Clays and Clay Minerals, 26, 327–340.[Abstract][CrossRef][ISI][GeoRef]

Eberl D.D. & Hower J. (1977) The hydrothermal transformation of Sodium and Potassium smectite into mixed-layer clay. Clays and Clay Minerals, 25, 215–227.[Abstract][CrossRef][ISI][GeoRef]

Eberl D.D., Whitney G. & Khoury H. (1978) Hydrothermal reactivity of smectite. American Mineralogist, 63, 401–409.[Abstract][ISI][GeoRef]

Greene-Kelly R. (1953) The identification of montmorillonoids in clays. Journal of Soil Science, 4, 233–237.[GeoRef]

Guillaume D., Neaman A., Mosser-Ruck R., Dubessy J., Cathelineau M. & Villiéras F. (2001a) Experimental study of hydrothermal reactivity of bentonite at 80 and 300°C in the presence of iron and/or iron oxides. Berichte der Deutschen Mineralogischen Gesellshaft, Beihefte zum European Journal of Mineralogy, 13, p. 69 p.

Guillaume D., Pironon J. & Ghanbaja J. (2001b) Valence determination of iron in clays by electron energy loss spectroscopy. Berichte der Deutschen Mineralogischen Gesellshaft, Beihefte zum European Journal of Mineralogy, 13, p. 70.

Guillaume D., Neaman A., Cathelineau M., Mosser-Ruck R., Peiffert C., Abdelmoula M., Dubessy J., Villiéras F., Baronnet A. & Michau N. (2003) Experimental synthesis of chlorite from smectite at 300°C in the presence of metallic iron. Clay Minerals, 38, 281–302.[Abstract/Free Full Text][CrossRef][ISI][GeoRef]

Hoffmann U. & Klemen E. (1950) Loss of exchangeability of lithium ions in bentonites on heating. Zeitschrift für Anorganische und Allgemeine Chemie, 262, 95–99.

Honnorez J. (1981) The aging of the oceanic crust at low temperature. Pp. 525–587 in: The oceanic lithosphere. The Sea, 7, (C. Emiliani, editor). Wiley Interscience Publishers, John Wiley & Sons, New York.

Inoue A. (1983) Potassium fixation by clay minerals during hydrothermal treatment. Clays and Clay Minerals, 31, 81–91.[Abstract][CrossRef][ISI][GeoRef]

Kang M.K., Kim D.Y. & Hwang N.M. (2002) Ostwald ripening kinetics of angular grains dispersed in a liquid phase by two dimensional nucleation and abnormal grain growth. Journal of the European Ceramic Society, 22, 603–612.[CrossRef]

Kastner M. (1981) Authigenic silicates in deep sea sediments: formation and diagenesis. Pp. 915–980 in: The oceanic lithosphere. The Sea, 7, (C. Emiliani, editor). Wiley Interscience Publishers, John Wiley & Sons, New York.

Madsen F.T. (1998) Clay mineralogical investigations related to nuclear waste disposal. Clay Minerals, 33, 109–129.[Abstract][CrossRef][ISI][GeoRef]

Müller-Vonmoos M., Kahr G., Bucher F., Madsen F.T. & Mayor P.A. (1991) Untersuchungen zum Verhalten von Bentonit in kontakt mit Magnetit und Eisen unter Endlagerbedingungen. NTB 91–14. Nagra, Hardstrasse 73, CH-5430 Wettingen, Switzerland.

Murad E. (1998) Clays and clay minerals: What can Mössbauer spectroscopy do to help understand them? Hyperfine Interactions, 117, 39–70.[CrossRef][ISI]

Schiffman P. & Fridleifsson G.O. (1991) The smectite-chlorite transition in drillhole Nj-15, Nesjavellir geothermal field, Iceland: XRD, BSE, and Electron Microprobe Investigations. Journal of Metamorphic Geology, 9, 679–696.[ISI][GeoRef]

Yamada H., Yoshioka K., Tamura K., Fujii K. & Nakazawa H. (1998) Reaction sequences of sodium montmorillonite under hydrothermal conditions. Clay Science, 10, 385–394.[GeoRef]

This article has been cited by other articles:

				P. Robion, C. David, and J. C. Colombier Temperature-induced evolution of the elastic and magnetic anisotropy in argillite samples from Bure underground research laboratory, eastern France Geological Society, London, Special Publications, January 1, 2007; 284(1): 57 - 69. [Abstract] [Full Text] [PDF]

				R. Mosser-Ruck, K. Devineau, D. Charpentier, and M. Cathelineau EFFECTS OF ETHYLENE GLYCOL SATURATION PROTOCOLS ON XRD PATTERNS: A CRITICAL REVIEW AND DISCUSSION Clays and Clay Minerals, December 1, 2005; 53(6): 631 - 638. [Abstract] [Full Text] [PDF]

This Article Abstract Figures Only Full Text (PDF) Alert me when this article is cited Alert me if a correction is posted Citation Map Services Email this article to a friend Similar articles in this journal Similar articles in ISI Web of Science Alert me to new issues of the journal Download to citation manager Citing Articles Citing Articles via HighWire Citing Articles via ISI Web of Science (5) Citing Articles via Google Scholar Google Scholar Articles by GUILLAUME, D. Articles by MICHAU, N. Search for Related Content GeoRef GeoRef Citation